Lemonade and silver linings

A while back my home was damaged in a hurricane, specifically my bedroom ceiling came in on me while I lay in bed!   Not the entire thing, but enough to make me wonder if I should evacuate my bedroom. In any case the hole in my ceiling left me with an insurance payment and with an opportunity :)

I see opportunity!!!!

I interviewed a few 'contractors' because I needed professional help and fast! One such man told me flat out 'no'. He would not pull the ceiling down, because that was a ridiculous idea.  After all, sand would fall continuously and then I would be begging him to come back and do it properly!

Can you say 'next'? In any case I found a  good contractor that took the rest of the ceiling down and removed the old lathe and plaster and a few of the -now extra- beams, leaving behind a beautiful exposed beam ceiling.  Sand and all :)

 One of the workers told me he didn't like the open beam look and that he was glad I wasn't his wife! Nerve! Who do you think is happier??

I had the stone treated to prevent it from dropping sandy dust. Basically a spray glue to affix it. Next I had to get the holes between the beams in the ceiling leading to other rooms sealed. A concrete board with a rough plaster coat did the trick and finally... the piece de resistance!

Molded trim angled outward around the entire perimeter of the ceiling... Why? So I could install low lights ... Say Christmas or rope LED type lights. Bam! Instant ambiance...   What do you think?

  

Moral of the story,  my way or the highway!  Not really, but you get the point... Bad situation turned absolutely fabulous!

Tool Diva

Overnight success!

Life is funny,  some things seem to take forever  while others happen so fast -- like my little vase.   One evening I had a bit of cement left over from another project and decided I didn't want to waste it.   I found a pretty plastic container left over from some liquid soap in the bathroom and decided that that shape was perfect for a vase. I quickly poured the left over mix into the container.   It  filled to the top -- too much. Next I needed to make the 'well' to hold the water for the flowers.  I had some leftover water pics from the last floral arrangement so decided to use them.  They slid into the mix easily. They were perfect,  the test tube like pic had a rubber lip that stopped it from falling completely in the soap container.  Voila!

Similar plastic container and floral pic used

I let them set overnight and in the morning pulled the pic out of the centre. I  needed to twist it a bit to get it out, but it came out whole.   (TIP:  use plastics with cement, ceramic and glass are too difficult and often break.  Plastic comes out easier.)

Then I carefully ripped the plastic off  the hardened cement.  This was a bit tricky, I used a carpet knife to score the plastic and peel it away-- not without a few dings in the vase but those you can sand away if you want.
Immediately I wanted to put flowers in it.  So I  filled the cavity with water, some spilled on the vase causing an interesting colour change.  Not sure I wanted that look, even if it was sort of mod looking.  I  grabbed the water pic,  put it back in the cavity and marked the height.  I used that same carpet knife to cut it down so it fit perfectly into the vase.

 This enabled me to lift it out and  fill it apart from the vase and insert it when filled... better option.  COMPLETE! I positioned it next to the piece of art my daughter brought back home from her travels... instant success!

Hope you like it!


Tool Diva

spring thrills

Thank God Spring has arrived. I was ready to give up! I was going nuts dragging the outdoor cushions in and out every other day:)  but now that the weather has improved my thoughts have turned back to my patio. I wanted to create a some additional mood lighting out there ... Candles would do the trick I thought.  I went to purchase 5 pillar candles and was shocked at the cost, between  $25-35 per CANDLE... $125 for candles seemed extreme. No freaking way!!!

After catching my breath I though -- I can beat that.  I went to the hardware store and purchased a $2 bag of concrete and went to work. My plan was to make fake pillars with indents for tea light candles and voila instant mood, and  waaaaay better price!

mixed right in the container

Too easy.  I took a few empty plastic cylindrical bottles and mixed the concrete right in them.  I used the plastic Niagara spray starch containers. (Ignore why I had so many, I keep  cool shaped plastic for potential projects)

Anyway, I added enough water to make it look like cake batter or peanut butter.  It's hard to get this wrong, even if it's a tad watery it will still work. It will just take longer to dry out.  Then I grabbed  a smaller plastic container, roughly the same size as the tea lights.  I sprayed this with PAM cooking spray so it would release easier when almost set.



Then I inserted that small one into the mixture.  To weigh it down a bit I added some rice, anything will do really.  Lastly I lay something flat over the top of the entire pillar-- to keep it set lower.
Otherwise it might float to the surface and not give me the depth I needed.



Practically done.  Now just let time do its magic.  About 6 hours later I removed the small plastic insert from the centre and left the rest to continue drying.   The next day I peeled the plastic off the concrete pillar and BAM! there it was.

Note the concrete will still be dark not fully dry and soft.  This is good because if you get any dings cutting it out you can just use your fingers or some sand paper to smooth the ding out, depending on how dry it is.

If you really wanted to be frugal you could PAM the big container and reuse it, but trying to save the container makes the release harder, up to you. I didn't bother this time.  Depending on your container you can get interesting patterns and very smooth, almost glass like pillars.  Too cool and all for just a few dollars.  Tea candles I had on hand so no $$ outlay there :). 

Here they are :
Yaaaay, can't wait till dark!

Tool Diva

Perfectly imperfect!

Hello all,  With the summer heat easing it's time to get back into perfecting my corner of the universe.  I was trolling the oracle / internet and came across a project I had to try.  It seemed too easy and too fabby not to give it a try.  It was a small garden stool made of concrete. Recently I have become obsessed with cement -  the versatility,  the ease of mix and go, the rough texture, muted colour and the low cost factor.  My love of a good bargain is second only to my love of FREE :)

So... I gave it a go.  I  purchased a small $2 bag of quickcrete and dragged it home ripped it open and began the process right in my kitchen.  I have no restraint once on the project trail...  oh well, I guess there are worse vices!  I  grabbed a 5 gallon bucket from my basement and a dowel (2 old broom handles  would work just fine) and took them into the kitchen.    I had to cut the dowels into (4) 18 inch pieces -- they would soon be the legs.   I cut the  bucket down to 9 inches high,  this allows the legs to splay out a bit and not stand straight up.  Cutting the bucket was the hardest part, I used an old carpet knife.

Next I  took out my measuring cup and put 4 cups of water in the measuring cup-- it just looked like the right amount.   Little by little I added the water to the cement and mixed it like cake batter -- started with a well in the centre and  worked to the outside.  A bit of a joke that because I haven't baked a cake in many many a year! But I knew not to over water and to fixate on a thick heavy mixture, like if peanut butter were cake mixture!  Once it looked right I gripped the bucket and banged the entire thing on the counter a few times to smooth it out and get rid of  the air bubbles.

Next I determined which ends of the dowels were  the best, the factory cut ones, not mine :)   I marked them, they would be the bit on the floor.  Next I measured 1 1/2 inches on each stick.  I wanted all four to be in the mix evenly.  then I stuck them in,  not too close to the edge so as to show through.   I prayed  they were perfectly placed :)  You could measure - set up a quadrant etc etc  but who does that???  Finally I left it on the counter to cure  / dry overnight.

HERE is the most important bit.  When cleaning up DO NOT wash your stuff in the sink- kitchen or otherwise.  Liquid concrete dries hard, even under water!  Think many, many dollars in ruined piping :(  Don't even wash your hands  in the sink, use another bucket and discard the sluice / juice safely.

Up at the crack o' dawn, I dashed to the kitchen to check it out.  It had hardened nicely.  Getting it out of the bucket wasn't too hard but it didn't slip out either!  I tapped it with my rubber mallet right the way around and tugged at the legs.   It came out - the bucket cracked a bit - but hey!  my stool was perfectly imperfect!  A few areas where the concrete didn't stick but round, smooth and grey!

I flipped it over and quickly sat on it - don't do this!    Why? The concrete isn't really dry and it could crack -- mine didn't.  It wobbled a bit, but I was undeterred, not taking it as a weigh thing.   I  found some old black rubber feet I had purchased for something else and put them on the bottom.  On the shorter one (because alas it wasn't even!) I added some filler to make up the difference and Voila!!!

 When showing it off to a friend she suggested stripes on the legs.  Yes I thought-- STRIPES!  Think hamburgler, think candycanes! But then I realised that that bit of decor should have happened before the legs were attached - save that for stool number 2! 'm now thinking mosaic! I fixed my thoughts on filling containers of all shapes - this was just the beginning -- yay  a new obsession!!! 

Anyway here it is.  My perfectly imperfect stool!

Tool Diva
 

Basket of love!!!!

Hello and a late happy new year to all!

I was given a fabby crate of wine for Christmas by some wonderful friends.  The wine is (and was!) delicious... but the box made my heart beat faster...

I envisioned all sort of wonderful things that I could do with it and today I made that come true!!!!

As we emerge from the January dry spell into Valentine's day, this particular  project seems especially fitting.  Back to loving life, with a glass of wine in hand!  Plus it was very inexpensive (who the heck has any spare $$$ after Christmas?) ... and very easy!  It's one of those projects that once finished, will  give you years of joy and be the envy of all of your friends who squandered $100+ on picnic baskets!!! Look at my new (practically free) beauty!

The finished product!!!!

Details...
First I cut an old atlas so that the maps fit the bottom of the crate and put that aside. Then I stained it a brown colour...reminiscent of old steamer trunks and cigars - yum!  Took about 5 minutes, and maybe 10 or 15 to dry enough to continue. Next I added some hardware, 4 corners on the bottom, 2 decorative hasps (the suitcase closure thingys) and a few upholstery tacks.

The big brass kind that you usually see on Art Deco furniture.  That investment cost me less than $20 at the local hardware store.  The hasps came with the tiniest nails, too delicate for me, so I substituted the tacks.  I thought it gave it a more substantial look.

For the strap I used an old old purse strap, I had a 30+ year old second hand, gifted to me,  coach leather  bag  (thanks Pat!) that probably originally sold with a matching saddle... :) it was well worn and perfect for this. With the holes already punched in it I used them as guides and staple gunned the handle to the box.  I stapled on top of the holes and used more upholstery tacks to hide the staples. I did this for  sturdiness, cause my picnic box is likely to carry enough food for four and an equivalent amount of wine :)

Now the interior...

I took the  atlas pages and brushed them with a tea solution to 'age' then, next I mod podged / glued them to the bottom of the crate.  I will eventually put a thin coat of urethane on it to seal it against food spills.  But
today is not that day. I couldn't wait to finish it!

Finally I assembled the beauty.  1 round white table cloth, 2 bottles of wine, 3 small plates, corkscrew, candles, matches, wine plugs ( like there will be some left over???!!!??!!) cutlery, cutting board, wine glasses, small vase for flowers,  yummy cheeses and napkins.

Good to go!  I'm thinking you could make one for you and your squeeze in about 2 hours once you have the bits and pieces.   Beautiful, elegant and totally fitting for that special occasion or for solitary trips to the beach with a good book mmmmmm :)

All this for less than $20 -- almost too good to be true!




Tool Diva
Xx

Sexy legs and a stylin' formica redo

Hello everybody!  I have been really busy with too many open projects and too few hours, but here is one that has been completed and that I am entirely pleased with.  Pleased because it looks great and it cost me about $250 of fresh cash! I had a few bits and pieces already so I don't count them in because either they were free or I purchased them more than a year ago.

Ignore me in the background!

My daughter's bathroom was a bit sorry looking.  Kinda unfortunate because I hadn't allocated any money or time to upgrading her bathroom as other items seemed to demand priority.  Well that bit me in the old cheeks when I went into her sink cabinet to get some nail polish remover (my toes were looking really sad too, ah the end of summer - but I digress!). I discovered that the metal pipes were so corroded I could push my finger through them.  I didn't  push my finger in - but I did adjust my priority listing.  Here is her bathroom... note the faux marble formica  top and the  'used to be trendy' clear plastic faucet covers.  What you don't see is the rusted shower curtain pole and dated light fixture above sink.  Hey - we all have to make sacrifices :)

My original thinking was to only replace the pipe -- but that came with problems.  I ended up having to remove the taps and the sink to get to everything.  So by the time the pipes and the cabinet were off the wall and the sink in pieces I had to concede that it was a perfect opportunity to surprise her with a  stylin', but  budget conscious upgrade.  I went to look at new vanities ( $600+ ouch!).  Truth is a new vanity would stand out like a sore thumb and hers was a custom size (41inches), so a standard top wasn't going to fit either.  Can you hear cha ching???

A friend came over while I was in the pipe replacement mode and together we nodded our heads on the escalation of the project into 'operation bathroom redo'!   New taps, new light fixture (already had one), new shower curtain rod, new counter top (still formica, but the updated version!)   I chose a brushed gun metal finish.  The oracle was consulted, how do you replace formica?   Don't you just love YouTube university!?!  Yup, not hard but requires a special tool -- a router --  so we borrowed one.  The bonus add in -- to up the styling quotient --was the cast iron bath tub feet added to the cabinet instead of ordinary legs!  I had purchased a set of 4 about 18 months ago on a trip to Nova Scotia at a place called renovators-resource. I just had to have them-- I knew they would come in handy - yaaaay!

Ok, so we used a screwdriver, my drill, a special cutting blade to cut the formica along with my jig saw,  the specialised laminate glue and silicone to water proof the top where it met the walls.  The plumbing required wrenches, plumbers tape and putty and of course
 new PVC pipes.   The router was used to smooth the edges of the
formica so that you didn't get uneven rough seams.

Replacing the taps was pretty easy.  Off with the old and on with the new + a bit of plumbers putty  (It's like plasticine or playdoh you roll little snakes and flatten them out and press in place.)  Connecting the drain - once the instructions were followed worked well.  We used the existing hole in the plywood surface to trace and cut (jig saw) the sink hole in the formica and carefully measured the actual size of the rectangular cabinet top.  The jig saw cut was rough but it didn't matter because that bit would be under the sink.  On the straight edges we used the specialised tool to score and snap it apart.

The legs!  Well, the feet were actually taller than the existing legs and caused us to have to make adjustments.   Nothing is without consequences! Like lengthening the piping (pipe extension needed) and the tubing that connects the water to the taps and drilling new holes (masonary drill bit)  in the tile wall to attach the sink cabinet to.  But hey it was worth it!

Admittedly I didn't work with the electricals -- those bits scare me somewhat.  It did involve buying a white circular cover to hide the hole left by the other light fixture.  Fortunately that's a common problem and they have an application for that!

With the addition of the new shower rod we were done!  I added some silver decor items to glam it up and Dom dum dum dum!   Ok, I can't sing but who cares, you get the picture!

silver spray job

Moral of the story... don't let old pipes prevent you from revealing your sexy legs!

TD

Rough and ready -- chair envy

It's rained for weeks - mud city!

So the other day a pair of free chairs came my way. (Thanks Lynn!)  They were wrought iron swivel type bar height stools.  Rusty and with almost no seat cushions left.  I was in love!  I imagined them sanded down with new seats placed next to my iron maiden and my ottoman.

The trouble was, I didn't have any fabby fabric to set them up with.  Who wants to pay 50$ a yard for fabric? -- I wanted a free solution to materialise :)  after all free stuff shouldn't cost you money!!!! I had to think fast, I was too eager to get started on them so had to take extreme care not to go near a fabric store.  Then the idea came...   Burlap, I love the look of it-- it is rough and yummy all at the same time, AND I knew where it was free (favourite word again!)  for the asking!!!  My neighbourhood - roast their own - coffee shop.  Thank you Rock Island Coffee!

I snagged 2 empty coffee bags just for the asking.  One said Guatemala, one just had the weight and type of bean on the front.  They were perfect!  I decided to not use the printed side - cause they didn't match :(   But first things first.  I sanded the chairs down using my sanding block, so much easier than using paper.  Soon they were smooth and ready.

I dismantled the seats, turns out the pressed fibre board was in shreds, had to be thrown out.  No matter, I had some ends of 1/2 inch or so plywood and traced the shape and took my jig saw and cut out the bottoms.  The foam was in reasonable shape so I kept that.  Because there was no fabric cover to trace, I had to make my own pattern.

technical stuff!

I took the board, placed it on the burlap and took the next handiest measuring tool I had -- a nail file -- and used it to make the pattern. (Hey, I didn't go to school for this stuff, I make it up and use what I have!)  I made a mark on the nail file and measured out from the edge of the wood and traced a shape about 4 inches bigger than the stool.   Then just to be extra sure I cut  the burlap an inch bigger than my pattern.  The little voice in my head said you can work with too big, but who can tolerate too small!  Turns out it was a good call.  I needed the extra.  Science sm-ience ha!

I put them together, it worked.  I took extra care to get the corners tight -- that's the difference between an amateur job and a snazzy one!  BUT ... OH NO...  I loaned my industrial staple gun to a friend who had just gone away and would be gone for 2 weeks.  Who has time for that!! I needed my gun.  In my fervor I used push pins (readily available)  I just needed to see them together.  The corners slackened. But I got the gist.  On a practical level I added some stick-on pads to the bottom of the stool legs, I hate the sound of metal scraping the floor.  Now to add the wow factor... 

In my craft / junk/ floral  workroom I have a bin of fabric samples.  Last Christmas I made a tree of floral rosettes using some tweedy fabric samples.  Perfect!  I stripped the tree and re-purposed the rosettes.  Yes!  the wow factor I was looking for.

Love!

Even though they aren't finished  'cause my friend won't return for at least another week,  I assembled them for a picture to show you.  I can't wait on stuff like that.  I'm the type of girl that forces people to open their  Christmas gifts early - so to tame the urge, I shop on Christmas eve. Oh well, we all have our faults.

A friend commented on the chairs "do you think they'll be itchy??" My response?  Hell yes, keep your pants on!   Sometimes beauty comes at a cost!

TD